C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Custom Threat LevelFigure 22-1: Custom Threat Levels dialog box3. Type a Threat Level ranking in the numbered Level entry fields. Thisranking and its corresponding color code will be used in otheradministration and monitoring station dialog boxes.4. When you click the check box between the Color field and the Configurebutton, the corresponding threat level will be enabled on the MonitorStation’s Non-hardware Status menu. To disable the corresponding threatlevel on the Monitor Station, click the check box again to remove thecheck mark.NOTEBy default, when you choose Threat Level, check boxes are not selectedand the entry Level fields and are empty. When you select a check box fora particular level and make an entry in the corresponding entry field, theThreat Level will be enabled on the Monitor Station’s Non-hardwareStatus menu. To save a threat level configuration, you must type in aunique Level name in that entry field. The system will not accept a blankentry while the check box is selected. You may choose no color code or thesame color for any of the six Levels.See Table 22-1 on page 22-6 for descriptions of the fields in this dialogbox.C•CURE 800/8000 Software Configuration Guide 22–5