C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Creating EventsTable 7-3: Event Dialog Box –- First, continuedBox/Option Description Configuration NotesLog Message Supplied ClearPreset Log Messages buttonPriorityCriticalHighMediumLowSelect the Log Message Supplied Clearcheck box to indicate that when you clearthis event you are required to enter acomment at the Monitoring Station.Displays the Assign Preset Log Messagesto Events dialog box to allow you to assignPreset Log Messages to the event.Determines the precedence for conflictingevents that operate on the same object.Example:A secure door event should have ahigher priority than a routine unlockevent for the same door.NOTE: When you are running TwoPhase Acknowledgment, youcan require comments atAcknowledgment or Clear,individually. You can alsochoose to require both orneither. This field is only visibleon systems running in TwoPhase Acknowledgementmode. You must first enableTwo Phase Acknowledgementin the C•CURE 800/8000System Setup (Diag CCURE).See “Two PhaseAcknowledgement” onpage 7-29 for configurationinformation.Preset Log Messages can only beaccessed to be included with eventsfrom the Event dialog box, and notconfigured. To configure Preset LogMessages, See “Preset LogMessages” on page 18-1.To display all events associated withan object, select the object (forexample, the door) and select ViewLinkages.You can also create a report for theobject.An integer that is a numericalequivalent to the event priority isdisplayed on the right side of thePriority box• Critical: 151 to 200; Default 175• High: 101 to 150; Default 125• Medium: 51 to 100; Default 75• Low: 0 to 50; Default 25C•CURE 800/8000 Software Configuration Guide 7–21