12.07.2015 Views

C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Some Scenarios for Configuring E-mail and PagesConfiguring C•CURE <strong>800</strong>/<strong>800</strong>0 to send a Page via Internet (E-mail) to a PagingServiceThis example uses PageNet as the paging service. Some of the entries given inthis example are specific to PageNet. If you are using a different pagingservice, obtain the correct information from your service.To Have an Event Send a Page Via Internet E-mail) to a Paging Service1. Enter the name of your SMTP mail server in the Mail Server field on thePaging tab of the System Variables dialog box. (See your networkadministrator for this information, if necessary.)2. Configure a carrier on the Carrier dialog box as follows:•In the Identification box, enter the name of the carrier and an optionaldescription, and select the Online check box to put the carrier online.•On the General tab in the Connection Type box, click Internet andenter the carrier’s Internet address, given to you by your pagingservice, in the Phone or Address field (for PageNet, enter pagenet.net).•On the Options tab in the Connection Type box, enter the maximumnumber of characters in the Maximum Characters field according tothe paging carrier’s limitation (for PageNet, enter 240).NOTEIf this setting exceeds the limitations of your carrier’s system, the pageprobably will not be sent. Contact your paging service for the maximumnumber of characters that can be sent at a time.3. Configure a paging recipient on the Recipient dialog box as follows:•In the Identification box, enter the person’s name and optionaldescription, and select the Online check box to put the recipient online.•In the Paging box, select the Enable check box, enter the PIN of theperson’s pager in the Page Pin field (the paging service provides thisnumber), and enter the name of the carrier you configured in Step 2.4. Configure a page message about the antipassback violation on the PageMessage dialog box as follows:•In the Identification box, enter a message name and optionaldescription and select the Online check box to put the message online.C•CURE <strong>800</strong>/<strong>800</strong>0 <strong>Software</strong> <strong>Configuration</strong> <strong>Guide</strong> 16–23

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!