C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Keypad Command FormatTo arm the intrusion zone, the security personnel press CMD/ENT 100CMD/ENT. To disarm the intrusion zone, security personnel enter CMD/ENT 101 CMD/ENT.The C•CURE 800/8000 automatically pads the unused portion of thecommand field to conform to the nine-digit command code format(000000100, 000000101). Security personnel need enter only the commandportion of this field (CMD/ENT100 CMD/ENT)Command Code with Prompt 1The keypad commands in this example arms and disarms intrusion zones ontwo floors. The Prompt 1 code includes an LCD display that prompts securitypersonnel for the intrusion zone floor:The format is configured as follows:Command Code: 6Prompt 1 Code: 3Prompt 2 Code: 0To arm a zone, the security personnel enter CMD/ENT 200 CMD/ENT.When reader displays the prompt 1 message “Enter floor”, personnel enterCMD/ENT 1 CMD/ENT or CMD/ENT 2 CMD/ENT. To disarm the zone,security personnel enter CMD/ENT 300 CMD/ENT. When the readerdisplays the prompt 1 message “Enter floor,” personnel enter CMD/ENT 1CMD/ENT or CMD/ENT 2 CMD/ENT.The C•CURE 800/8000 automatically pads the unused portion of thecommand field and prompt fields to conform to six-digit and three-digitrequirements (for example 000200, 001). Security personnel need enter onlythe non-zero portions of the command (CMD/ENT 200 “Enter Floor” CMD/ENT 1 CMD/ENT).13–10 C•CURE 800/8000 Software Configuration Guide