C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring a Guard Tour9. You can specify an event in Activate this event if tour completes late bydouble-clicking in the field and selecting an event from the EventSelection browser that appears.10. Set the Method used for tour stop check-ins to Sequential (guard mustcomplete all tour stops in the prescribed order) or Random (guard mustcomplete all tour stops, in any order).11. Click Configure Tour Stops to set up the actual readers and inputs thatmake up the Guard Tour stops. See “Configuring Tour Stops” on page 9-7for detailed instructions.12. Click OK to save your settings.To Edit an Existing Online Guard Tour1. Clear Online.2. Modify the guard tour setting and click OK to save the Guard Tour.3. Exit and then re-enter the Guard Tour dialog box4. Select Online to set the guard tour back online.5. Click OK to save the change.Configuring Tour StopsThe Configure Guard Tour Stop dialog box allows users to:• View a list of tour stops already configured for the guard tour.• Create tour stops for this guard tour.• Modify tour stops configured for this guard tour.• Delete tour stops configured for this guard tour.Tour Stop Considerations• A tour stop can be configured to use either a card reader or an input as themonitoring device for the stop.• The same reader or input can be used to monitor multiple tour stops in asingle tour.C•CURE 800/8000 Software Configuration Guide 9–7