C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Clearance FiltersFigure 22-19: Personnel Query Browser2. Click the Clearances tab in the Edit Personnel Record (see Figure 22-20on page 22-25).Example:The employee shown in Figure 22-20 on page 22-25 has been selected tohave the Clearance Filter 5 assigned to her record. In this instance, whenthe highest Threat Level - Critical, is activated, Tara McHugh will haveunrestricted access to all Readers in the Reader Group for which theclearance filter value is 5 or lower. If an employee with a setting ofClearance Filter 4 were to attempt access at an entrance in the sameReader Group, admittance would be denied.Conversely, if you were to choose Clearance Filter 1, this same employeewould be subject to all security restrictions for personnel warranted byThreat Level activation. Clearance Filter 1 is the default system setting. Setthe Personnel that you want to have full access to the highest personnelclearance filter for which your system has been configured.22–24 C•CURE 800/8000 Software Configuration Guide