C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring AreasUsers locked out of an area can access non-lockout areas without triggeringthe lockout timer. If users activate a lockout, they cannot reenter the area untilthe lockout period had passed. The reader will display a reject "lockout"message.If users do not reenter the lockout are until the lockout period has passed,they can then access the area without being rejected.NOTEThe Area Lockout Configuration box is unavailable if you enforce eitherCarpool Regular or Carpool Timed Antipassback.To Configure Area Lockout1. From the Configure menu, choose Area. The Area Selection dialog boxwill be displayed.2. From the Area Selection dialog box, select the primary area and clickEdit. If the primary area is not configured, click New.3. Select the No Antipassback Checking option button and be sure that theMustering Area check box is not selected, as shown in Figure 2-4 onpage 2-18.C•CURE 800/8000 Software Configuration Guide 2–17