C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Clearance DefinitionsTable 4-1: Configure Clearance Dialog Box Definitions, continuedField/ButtonAddControl ListDeleteUse Activation Dateand TimeUse Expiration Dateand TimeOKCancelElevatorsDescriptionClick Add to add the Door/Time Specification combination to the listof clearance code definitions in the Control list.The Elevator Control list displays a list of elevator Clearances thathave been added. Each clearance is a combination of an elevator orelevator group, floor or floor group, and time specification.Select a Clearance combination in the Control list and click Deleteto remove the Clearance combination from the Clearance.Select this box to set an Activation Date and Time for the clearance.If you leave this field blank the clearance is active immediately.Select this box to set Expiration Date and Time for this clearance. Ifyou leave this field blank the clearance never expires.Click OK to accept your changes to the Clearance configuration forthis Clearance. The Configure Clearance dialog box is displayedagain.Click Cancel to discard your changes to the Clearance configurationfor this Clearance. The Configure Clearance dialog box is displayedagain.Click Elevators to open the Elevator Clearance dialog box, whereyou specify elevator clearances for the Clearance.Table 4-2: Elevator Floor Configuration for ClearanceField/ButtonClearanceElevatorsElevator GroupsEdit ElevatorsDescriptionDisplays the name of the Clearance currently being edited to includeElevators and Floors.Click to display a list of Elevators that you can use in this Clearance.You can double-click on an Elevator in the list to edit it.Click to display a list of Elevator Groups that you can use in thisClearance. You can double-click on an Elevator Group in the list toedit it.Visible when you select the Elevators button. Click to display theElevator Selection browser, where you can select an Elevator for theClearance, edit an existing Elevator, or create a new Elevator.4–8 C•CURE 800/8000 Software Configuration Guide