C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Defining E-mail and Paging System Configuration Options3. Define the Paging options as follows:Table 16-1: Paging OptionsFieldPort used for directconnect paging serviceDescriptionEnter the name of the serial communications port connectedto the local paging terminal. You can double-click on the box todisplay a list of configured ports. This field is used only if yousend pages via a local paging terminal.Mail Server Enter the name of the SMTP mail server used to send your e-mail messages. (See your network administrator for thisinformation, if necessary.) This field is used only if you send e-mail or transmit page messages to a paging service via theInternet.TAPI Modem used fordialup paging serviceMaximum retries toconnect to pagingserviceSelect the name of the TAPI modem used to connect to apaging service.Click on the drop-down list box to display a list of configuredTAPI modems that the C•CURE 800/8000 driver has detectedon your system.This field is used only if you transmit page messages to apaging service via a dialup connection.NOTE: You configure TAPI modems on the Windows controlpanel. You need to restart C•CURE 800/8000 driverafter you configure a modem. See “Shutting Down andRestarting C•CURE 800/8000” in theC•CURE 800/8000 System Maintenance Guide.Enter the number of times to retry a failed communication withthe paging service. The default value is 3.16–6 C•CURE 800/8000 Software Configuration Guide