C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Creating EventsDefault StateArmed If selected, the event will activate. Events that are unarmed do notactivate.Armed events display in theMonitoring Station. Double click theevent, or click the Show Causesbutton in the Events dialog box, todisplay additional event information.OtherTable 7-3: Event Dialog Box –- First, continuedBox/Option Description Configuration NotesView GroupsClick View Groups to see groups thatinclude the eventOptionsSend state changes of this eventto monitoring stationDisplays the event in the Monitoring Station.Click Send state changes of this event tomonitoring station if you want the eventdisplayed in the Event Monitor, the GeneralActivity Monitor to display a message, andthe Journal to log a message when thisevent changes state.Neither the Event Monitor nor the GeneralActivity Monitor will display activation anddeactivation for this event should you clearthis option. However, these event statechanges will automatically be sent to theJournal unless both the Send state changesof this event to monitoring station and Sendstate changes of this event to journaloptions are cleared.NOTE: If Incident ID functionality isenabled, this check box andthe next must be selected tomake sure that all monitoredactivities and activitymessages tagged with theIncident ID are sent to both theMonitoring Station and theJournal. For more informationabout Incident Tracking, seethe “Journal Reporting”chapter in the C•CURE 800/8000 Reports Guide.7–22 C•CURE 800/8000 Software Configuration Guide