C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring Time Specifications6. If your system uses the Default Holiday mode, go to Step 7 on page 23-8.- or -If your system uses the Distributed Holidays mode and you wish toassign one or more Holiday Lists to this Time Specification as overridesfor host use, click the Host Holiday Lists button. The Select Holiday Listsdialog box, opens, as shown in Figure 23-3 on page 23-7.Figure 23-3: Select Holiday List Dialog Box– For each Holiday List that you want to assign to the TimeSpecification for host use, click that Holiday List in the Available boxand click Add to add it to the Selected box. You can click Add All toinclude all of the Available Holiday Lists for the Time Specification.You can click Remove or Remove All to remove one or all HolidayLists from the Time Specification.NOTEThe Available box includes all existing Holiday Lists in the system notcurrently used by this Time Specification.– Click OK to save the selected Holiday Lists and return to the TimeSpecification dialog box.C•CURE 800/8000 Software Configuration Guide 23–7