C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Setting the Preset Log Messages Editing PrivilegeSetting the Preset Log Messages Editing PrivilegeTo set the Preset Log Messages editing privilege in the ConfigureMonitoring Privilege dialog box:1. From the C•CURE 800/8000 Administration application menu, selectPersonnel>Monitoring Privilege. The Monitoring Privilege Selectionbrowser appears.2. Select the security object in the list and click Edit, or click New if you areconfiguring a new monitoring privilege. The Configure MonitoringPrivilege dialog box appears.3. Click on the Allow edit of Preset Log Messages check box (located in theOptions area) to allow editing of Preset Log Messages for the monitoringprivilege.NOTE• If this check box is selected, the user may edit log messages that have Preset LogMessages.• If this check box is not selected, and Preset Log Messages are available for the event,the user must select a Preset Log Message. The Preset Log Message cannot bechanged when acknowledging, or clearing, the event.• If there are no Preset Log Messages available for the event, this check box has no effect.4. Click OK.18–10 C•CURE 800/8000 Software Configuration Guide