C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Door DefinitionsTable 5-4: Access Events Dialog Box DefinitionsField/ButtonDoor Open Alarm CausesEventLock Unsecured CausesEventLock Tamper Causes EventDSM Tamper Causes EventDuress Causes EventAll Admits Cause EventAll Rejects Cause EventAll Visitor Admits Cause EventAll Visitor Rejects CauseEventAll Noticed Admits CauseEventAll Noticed Rejects CauseEventDescriptionDoor opened without a valid card or request to exit, andwith one of the lock releases activated. The C•CURE 800/8000 indicates the type of lock release that occurred. (i.e.fire, crash bar)A lock sensor is active when it should be inactive. Indicatesthat the lock hardware did not return to a lock position at theexpiration of the unlock period. The C•CURE 800/8000indicates the name of the lock sensor that caused theevent.A lock sensor is inactive when it should be active. Indicateslock sensor tampering or failure of lock hardware. TheC•CURE 800/8000 indicates the name of the lock sensorthat caused the event.Indicates DSM tamper for DSM inputs on the same side ofthe door. The C•CURE 800/8000 indicates the name of theDSM that did not change state.There is duress at this door. Define duress conditions onthe Hardware>Card Format dialog box.This door is accessed.An access is rejected at this door.A person with visitor or escorted visitor status accesses thisdoor.A person with visitor or escorted visitor status is deniedaccess at this door.A particular person accesses this door. Related to theNoticed Flag set in each personnel record.A particular person is denied access at this door. Related tothe Noticed Flag set in each personnel record.C•CURE 800/8000 Software Configuration Guide 5–27