C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Clearance Filters23. Click More>>> to display the second Event Configuration dialog box, asshown in Figure 22-15 on page 22-20.Figure 22-15: Threat Level Event Configuration Second Dialog BoxThis dialog box allows you to type a set of instructions to be displayed onEvent Monitoring screens and to specify actions to be associated with theThreat Level Event.24. Click Automatic Controller Selection to allow theC•CURE 800/8000 driver to select the best controller in the iSTAR clusterto which to download this event. Once you click the AutomaticController Selection button, the system enters the name of the selectedcontroller in the Event is downloaded to controller field.25. Click Modify... to specify actions to be associated with the Threat LevelEvent. The Event Action Selection dialog box appears. Use the Actiondrop-down list to select the appropriate set clearance filter from amongthe six available, as shown in Figure 22-16 on page 22-21.NOTEapC panels do not support the action of setting clearance filter values.22–20 C•CURE 800/8000 Software Configuration Guide