C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Elevators DefinitionsElevators DefinitionsThe tables in this section provide details about the fields and buttons on theElevator dialog box (Table 6-1 on page 6-8), the Elevator Buttons dialog box(Table 6-2 on page 6-9), and the Configure Elevator Events dialog box(Table 6-3 on page 6-10).Table 6-1: Elevator Dialog Box DefinitionsField/ButtonDescriptionIdentificationElevator NameDescriptionOnlineEnter a unique name for this elevator.Enter a brief description for this elevator.Click this check box to put the elevator online. For an elevator to beput online, it must have an at least one button configured.Floor Selection ModeNo Input SelectionOne InputMultiple InputsInput NameNo inputs are connected (wired by the elevator installer) to theelevator buttons. C•CURE 800/8000 cannot tell whether or not theperson presses a floor button after being granted access.One input is connected to all buttons on this elevator. Enter theinput’s name in the Input Name box. When a person presses anelevator button, C•CURE 800/8000 detects that a button has beenpressed, but cannot determine which button.Multiple inputs are associated with this elevator. Each elevatorbutton is connected to a different input. When a person presses anelevator button, C•CURE 800/8000 can determine which button theperson pressed.Click Elevator Buttons to configure the inputsfrom the Elevator Buttons dialog box.When you select One Input, you need to identify that input in theInput Name field. Enter the input name or double-click in the fieldto view a list of available inputs. Click an input in the list and clickSelect to specify the input.All inputs, outputs, and readers on an elevator must be associatedwith the same time zone.Reader StatusReader NameEnter the name of the reader you want to associate with theelevator. You can double-click on the field to view a list of possiblereaders.6–8 C•CURE 800/8000 Software Configuration Guide