C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Time Specification DefinitionsTable 23-2: Time Specification Dialog Box fields, continuedField/ButtonDescriptionEventsActivate event onTS activationEnter the event /event group to activate while this time specification isactive. Type in the event name or double-click in the text box to view alist of possible events.NOTE: For objects on dialup panels that are not connected to the hostor direct-connect panels that are in comm failure, timespecifications can only activate the following event actions:- Activate and pulse outputs- Arm inputs- Unlock doors- Cause readers to require PINsHowever, if one of the following options is configured for the event,the above event actions are not performed:• Events requiring acknowledgement• Events with an activation delay• Events with a minimum activation time• Events that activate objects with a different time zone than thetime zone of the time specification triggering the event.NOTE: iSTAR Controllers — With iSTAR controllers, events eithercan be on the host or downloaded to the controllers. As aresult, the following applies to events:If the event is on a controller and the cluster is in comm failure,provided that the event action target controller is in the samecluster, time specifications can still activate all the eventactions — except those that require host interaction, such as:- Connect iSTAR- Activate CCTV action- Send e-mail- Send page- Acknowledge event- Initiate roll call reportIf the event is on the host and the iSTAR controller is in commfailure, the host can still activate the event but the actions onthe controller are not activated.C•CURE 800/8000 Software Configuration Guide 23–13