C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring ElevatorsFigure 6-2: Elevator Dialog Box3. Type a unique name for this elevator in the Elevator Name field.4. Type a description of the elevator (for example, its location or function) inthe Description field.5. Choose a Floor Selection Mode for the elevator. See the definitions inTable 6-1 on page 6-8 for details about the possible choices.6. If your Floor Selection Mode selection was One Input, Select an input forthe elevator by double-clicking in the Input Name field and selecting aninput from the Input Selection browser that opens.7. Select a reader for the elevator by double-clicking in the Reader Namefield and selecting a reader from the Reader Selection browser that opens.The reader you select must be on the same panel or controller as theinputs you chose previously.8. Click Elevator Buttons to open the Elevator Buttons dialog box toconfigure elevator buttons. See “Configuring Elevator Buttons for FloorAccess” on page 6-5 for more information.C•CURE 800/8000 Software Configuration Guide 6–3