C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Configuring a Guard Tour2. To Add a new Tour Stop, click New. To Edit an existing Tour Stop, clickEdit. The Configure Guard Tour dialog box opens, so that you canconfigure this Guard Tour stop.3. Type in a name for the Guard Tour stop in the Name field.4. Type in a description of the Guard Tour stop in the Description field.5. To use a Reader for the Tour stop, select the Tour Stop is monitored byReader option, and double-click in the field to open a Reader SelectionBrowser to select a Reader.6. To use an Input for the Tour stop, select the Tour Stop is monitored byInput option, and double-click in the field to open an Input SelectionBrowser to select an Input.7. If you are configuring a Sequential Tour, you can set a Minimum time toarrive at stop in hours and minutes. If the guard arrives earlier than thistime from the previous guard stop, a Guard Tour error is reported. Thisfield is unavailable with Random Tours.8. If you are configuring a Sequential Tour, you can set a Maximum time toarrive at stop in hours and minutes. If the guard arrives later than thistime from the previous guard stop, a Guard Tour error is reported. Thisfield is unavailable with Random Tours.9. Click OK to save your changes.C•CURE 800/8000 Software Configuration Guide 9–9