C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Recipient DefinitionsRecipient DefinitionsTable 20-1 on page 20-5 includes definitions of the fields and buttons on theRecipient dialog box.Table 20-1:Recipient Dialog Box FieldsFieldNameDescriptionOnlineDescriptionEnter a unique name for the Recipient.Enter a description of the recipient. This text is for informationonly.Select Online to put the recipient online. C•CURE 800/8000 willonly send e-mail and page messages to online recipients.Enable Select Enable to enable the recipient for paging. C•CURE 800/8000 will only send page messages to those recipients who havepaging enabled.Page PINCarrierActivate this eventwhen page failsE-mail AddressActivate this eventwhen e-mail failsEnter the PIN number for the pager device as assigned by yourcarrier or by the administrator of your local paging terminal.Enter the name of the paging carrier by double-clicking in thefield to display a list of configured carriers. To configure carriers,refer to the C•CURE 800/8000 Hardware Configuration Guide.Enter an optional event to be activated if this page fails.You candouble-click on the box to display a list of configured events.Enter the recipient’s full e-mail address — mypager@carrier.com or myemail@mycomputer.com, for example.C•CURE 800/8000 will only send e-mail messages to recipientswho are assigned an e-mail address.Enter an optional event to be activated if this e-mail fails. You candouble-click on the box to display a list of configured events.C•CURE 800/8000 Software Configuration Guide 20–5