C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

Area DefinitionsPersonnel Group Occupancy Dialog Box DefinitionsTable 2-12: Personnel Group Occupancy Dialog Box DefinitionsFieldPersonnel GroupMaximum OccupancyMinimum OccupancyPass-through exemptArea wide PassthroughPass-throughviolation after:DescriptionDouble-click in this field to open the Personnel Group Select list.Select the group you want to apply the occupancy restriction to andclick OK.Enter the maximum number of personnel from the selectedpersonnel group allowed in the area at a time. The default is 0. Youcan enter up to 65535 personnel.If you choose to leave it at the default value (zero) then no maximumoccupancy restriction is enforced.NOTE: The number specified in this box, if it is not zero, must begreater than the number specified in the MinimumOccupancy box.Enter the minimum number of personnel from the selectedpersonnel group allowed in the area at a time. The default is 0. Youcan enter up to 65535 personnel. If you type zero then no minimumoccupancy restriction is enforced.NOTE: The number specified in this box must be less than thenumber specified in the Maximum Occupancy box unless themaximum value specified is zero.Select this option to make the selected personnel group exemptfrom area wide pass-through restriction. (Available only for Areas ona cluster.)A pass-though violation occurs when personnel (including personnelfrom a group) fail to exit the area within the defined time.Select this option to enforce the area wide pass-through configuredin the Occupancy tab.A pass-though violation occurs when personnel (including personnelfrom a group) fail to exit the area within the defined time.Select this option and specify a time for before a pass-throughviolation occurs. (Available only for Areas on a cluster.)A pass-though violation occurs when personnel (including personnelfrom a group) fail to exit the area within the defined time.If the value is 0, no pass-through violation is triggered. Themaximum value you can enter is 999 hours and 59 minutes.2–56 C•CURE 800/8000 Software Configuration Guide