C•CURE 800/8000 Software Configuration Guide - Tyco Security ...

OverviewOverviewPriority Labels enables you to create custom priority labels. Default values forpriorities are given and you map those values to Custom Priority Labels. Youcan create up to 8 Custom Priority Labels.The default labels are Critical High, High, Medium, Medium Low and Low.By default, C•CURE 800/8000 uses four priority labels (each label on thePriority Labels dialog box is used twice) with the following default values:• Critical (175 default value, range of 151-200)• High (125 default value, range of 101-150)• Medium (75 default value, range of 51-100)• Low (25 default value, range of 0-50)These four values are selectable when you configure an event.When you change the default labels, you need to provide a label name foreach of the eight possible labels. If you want to have fewer than eight prioritylabels, you can repeat adjacent labels and C•CURE 800/8000 combines theranges for those labels. You cannot create overlapping ranges.Example:If you wanted to have only three priority levels, you could create labels asshown in Figure 19-1. Select Configure>Priority Labels to view.Figure 19-1: Custom Priority Labels Dialog Box19–2 C•CURE 800/8000 Software Configuration Guide