Junos OS Interfaces Command Reference - Juniper Networks

show interfaces snmp-index
Syntax show interfaces snmp-index snmp-index
Release Information Command introduced before Junos OS Release 7.4.
Description Display information for the interface with the specified SNMP index.
Options This command has no options.
Additional Information Output from both the show interfaces interface-name detail and the show interfaces
Required Privilege
Level
interface-name extensive command includes all the information displayed in the output
from the show interfaces snmp-index command.
view
List of Sample Output show interfaces snmp-index on page 107
Output Fields The output fields from the show interfaces snmp-index snmp-index command are identical
Sample Output
show interfaces
snmp-index
Copyright © 2012, Juniper Networks, Inc.
to those produced by the show interfaces interface-name command. For a description of
output fields, see the other chapters in this manual.
Chapter 2: Common Interface Commands
user@host> show interfaces snmp-index 33
Physical interface: so-2/1/1, Enabled, Physical link is Down
Interface index: 149, SNMP ifIndex: 33
Link-level type: PPP, MTU: 4474, Clocking: Internal, SONET mode, Speed: OC48,
Loopback: None, FCS: 16, Payload scrambler: Enabled
Device flags : Present Running Down
Interface flags: Hardware-Down Point-To-Point SNMP-Traps 16384
Link flags : Keepalives
CoS queues : 8 supported
Last flapped : 2005-06-15 11:45:57 PDT (05:38:43 ago)
Input rate : 0 bps (0 pps)
Output rate : 0 bps (0 pps)
SONET alarms : LOL, PLL, LOS
SONET defects : LOL, PLL, LOF, LOS, SEF, AIS-L, AIS-P
107