Junos OS Interfaces Command Reference - Juniper Networks

Table 131: Channelized DS3 show interfaces Output Fields (continued)
Field Name
DS3 media
HDLC configuration
Interface transmit
queues
Field Description
Counts of T3 media-specific errors. For detailed definitions of the T3 (DS-3)
error events (BPV, EXZ, LCV, PCV, and CCV) and performance parameters (LES,
PES, PSES, CES, CSES, SEFS, and UAS), see RFC 2496.
• PLL Lock—Phase-locked loop out of lock
• Reframing—Frame alignment recovery time
• AIS—Alarm indication signal
• LOF—Loss of frame
• LOS—Loss of signal
• IDLE—Idle code detected
• YELLOW—Remote defect indication
• BPV—Bipolar violation
• EXZ—Excessive zeros
• LCV—Line code violation
• PCV—Pulse code violation
• CCV—C-bit coding violation
• LES—Line error seconds
Copyright © 2012, Juniper Networks, Inc.
• PES—P-bit errored seconds
• PSES—P-bit errored seconds (section)
• CES—C-bit errored seconds
• CSES—C-bit severely errored seconds
• SEFS—Severely errored framing seconds
• UAS—Unavailable seconds
Information about the HDLC configuration.
• Giant threshold—Giant threshold programmed into the hardware.
• Runt threshold—Runt threshold programmed into the hardware.
• Timeslots—Configured time slots for the interface.
• Byte encoding—Byte encoding used: Nx64K or Nx56K.
• Data inversion—HDLC data inversion setting: Enabled or Disabled
Name of the transmit queues and their associated statistics for each DS1 channel
on the Channelized DS3-to-DS1 PIC.
• B/W—Queue bandwidth as a percentage of the total interface bandwidth.
• WRR—Weighted round-robin (in percent).
• Packets—Number of packets transmitted.
• Bytes—Number of bytes transmitted.
• Drops—Number of packets dropped.
• Errors—Number of packet errors.
Chapter 18: Channelized T1 and T3 Interface Operational Mode Commands
Level of Output
extensive
extensive
extensive
755