Junos OS Interfaces Command Reference - Juniper Networks

CHAPTER 11
SONET/SDH Interface Operational Mode
Commands
Table 93 on page 521 summarizes the command-line interface (CLI) commands that you
can use to monitor and troubleshoot aggregated SONET/SDH interfaces and SONET/SDH
interfaces. Commands are listed in alphabetical order.
Table 93: SONET/SDH Interface Operational Mode Commands
Task
Copyright © 2012, Juniper Networks, Inc.
Monitor Automatic Protection Switching (APS) information.
Display status information about aggregated SONET/SDH
interfaces.
Display status information about SONET/SDH interfaces.
Display the transceiver temperature, laser bias current, laser
output power, receive optical power, and related alarms
for SONET interfaces.
Command
show aps
show interfaces (Aggregated
SONET/SDH)
show interfaces (SONET/SDH)
show interfaces diagnostics optics
(SONET)
For more information about monitoring and troubleshooting SONET interfaces, see
“Investigate SONET Interfaces” in the Junos Interfaces Network Operations Guide.
521