Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
Table 44: show interfaces mac-database Output Fields (continued)
Field Name
Link-level type
MTU
Speed
Loopback
Source filtering
Flow control
Device flags
Interface flags
Link flags
Logical Interface
Logical interface
Index
SNMP ifIndex
Flags
Encapsulation
MAC address, Input
frames, Input bytes,
Output frames, Output
bytes
Number of MAC
addresses
294
Field Description
Encapsulation being used on the physical interface.
MTU size on the physical interface.
Speed at which the interface is running.
Whether loopback is enabled and the type of loopback: local or remote.
Whether source filtering is configured.
Whether flow control is enabled or disabled.
Information about the physical device. Possible values are described in the “Device Flags” section
under “Common Output Fields Description” on page 125.
Information about the interface. Possible values are described in the “Links Flags” section under
“Common Output Fields Description” on page 125.
Information about the link. Possible values are described in the “Device Flags” section under “Common
Output Fields Description” on page 125.
Name of the logical interface.
Logical interface index number, which reflects its initialization sequence.
Logical interface SNMP interface index number.
Information about the logical interface (possible values are described in the “Logical Interface Flags”
section under “Common Output Fields Description” on page 125.
Encapsulation on the logical interface.
MAC address and corresponding number of input frames, input bytes, output frames, and output
bytes.
Number of MAC addresses configured.
Copyright © 2012, Juniper Networks, Inc.