Junos OS Interfaces Command Reference - Juniper Networks

show tgm fpc
Syntax show tgm fpc slot-number (media-gateway-controller | dsp-capacity)
Release Information Command extended in Junos OS Release 8.5.
Description (J2320, J2300, J4350, and J6350 routers only) Display information about TGM550 VoIP
Required Privilege
module connectivity and digital signal processor (DSP) capacity.
Options slot-number—Number of the slot in which the TGM550 VoIP module is installed.
Level
Related
Documentation
media-gateway-controller—Display IP addresses of the Media Gateway Controllers
(MGCs) configured in the MGC list for the TGM550 VoIP module.
dsp-capacity—Display the number of voice channels available on the TGM550 VoIP
view
•
module.
set tgm fpc on page 912
List of Sample Output show tgm fpc 2 media-gateway-controller on page 921
show tgm fpc 3 dsp-capacity on page 922
Output Fields Table 159 on page 921 lists the output fields for the show tgm fpc command. Output fields
Sample Output
show tgm fpc 2
media-gateway-controller
Copyright © 2012, Juniper Networks, Inc.
are listed in the approximate order in which they appear.
Table 159: show tgm fpc Output Fields
Field Name
Media gateway controller(s)
DSP Capacity
Field Description
user@host> show tgm fpc 2 media-gateway-controller
Media gateway controller(s): 173.26.232.77
10.10.10.30
10.10.10.40
Chapter 24: VoIP Interface Operational Mode Commands
Displays the IP addresses of the Media Gateway Controllers (MGCs)
configured in the MGC list for the TGM550 VoIP module.
The first MGC in the list is the primary MGC. The TGM550 VoIP
module searches for the primary MGC first. If it cannot connect to
the primary MGC or loses its connection to the primary MGC, it
attempts to connect to the next MGC in the list, and so on.
Displays the DSP capacity of the TGM VoIP module board in terms
of the number of voice channels supported.
921