Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
show interfaces (Gigabit Ethernet)
Syntax show interfaces ge-fpc/pic/port
otn-options {
bytes {
transmit-payload-type number;
}
}
Release Information Command introduced before Junos OS Release 7.4.
Description (M Series, T Series, and MX Series routers only) Display status information about the
specified Gigabit Ethernet interface.
Options ge-fpc/pic/port—Display standard information about the specified Gigabit Ethernet
interface.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
Additional Information In a logical system, this command displays information only about the logical interfaces
Required Privilege
Level
and not about the physical interfaces.
view
List of Sample Output show interfaces (Gigabit Ethernet) on page 207
192
show interfaces (Gigabit Ethernet on MX Series Router) on page 207
show interfaces brief (Gigabit Ethernet) on page 207
show interfaces detail (Gigabit Ethernet) on page 208
show interfaces extensive (Gigabit Ethernet IQ2) on page 209
show interfaces (Gigabit Ethernet Unnumbered Interface) on page 212
Output Fields See Table 29 on page 193 for the output fields for the show interfaces (Gigabit Ethernet)
command. For Gigabit Ethernet IQ and IQE PICs, the traffic and MAC statistics vary by
interface type. For more information, see Table 30 on page 206.
Copyright © 2012, Juniper Networks, Inc.