14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 26: Aggregated Ethernet show interfaces Output Fields (continued)<br />

Field Name<br />

SNMP ifIndex<br />

Generation<br />

Link-level type<br />

MTU<br />

Speed<br />

Loopback<br />

Source filtering<br />

Flow control<br />

Minimum links<br />

needed<br />

Device flags<br />

Interface flags<br />

Current address<br />

Hardware address<br />

Last flapped<br />

Input Rate<br />

Output Rate<br />

Statistics last<br />

cleared<br />

Field Description<br />

SNMP index number for the physical interface.<br />

Unique number for use by <strong>Juniper</strong> <strong>Networks</strong> technical support only.<br />

Encapsulation being used on the physical interface.<br />

Maximum transmission unit size on the physical interface.<br />

Speed at which the interface is running.<br />

Loopback status: Enabled or Disabled. If loopback is enabled, type of loopback:<br />

Local or Remote.<br />

Source filtering status: Enabled or Disabled.<br />

Flow control status: Enabled or Disabled.<br />

Number of child links that must be operational for the aggregate interface to<br />

be operational.<br />

Information about the physical device. Possible values are described in the<br />

“Device Flags” section under “Common Output Fields Description” on page 125.<br />

Information about the interface. Possible values are described in the “<strong>Interfaces</strong><br />

Flags” section under “Common Output Fields Description” on page 125.<br />

Configured MAC address.<br />

Hardware MAC address.<br />

Date, time, and how long ago the interface went from down to up or up to down.<br />

The format is Last flapped: year-month-day hours:minutes:seconds timezone<br />

(hours:minutes:seconds ago). For example, Last flapped: 2002-04-26 10:52:40<br />

PDT (04:33:20 ago).<br />

Input rate in bits per second (bps) and packets per second (pps).<br />

Output rate in bps and pps.<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.<br />

Time when the statistics for the interface were last set to zero.<br />

Chapter 4: Ethernet Interface Operational Mode <strong>Command</strong>s<br />

Level of Output<br />

detail extensive none<br />

detail extensive<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

None specified<br />

None specified<br />

detail extensive<br />

165

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!