Junos OS Interfaces Command Reference - Juniper Networks

clear oam ethernet link-fault-management state
Syntax clear oam ethernet link-fault-management state
Release Information Command introduced in Junos OS Release 8.4.
Description On all M Series, MX Series, T320, and T640 routers, clear link fault management state
Required Privilege
information, restart the link discovery process, and reset OAM loopback state (if set
previously) on Ethernet interfaces.
Options none—Clear OAM link fault management state information, restart the link discovery
Level
process, and reset OAM loopback state (if set previously) on all Ethernet interfaces.
interface-name—(Optional) Clear OAM link fault management state information, restart
view
the link discovery process, and reset OAM loopback state (if set previously) on the
specified Ethernet interface only.
List of Sample Output clear oam ethernet link-fault-management state on page 151
Output Fields When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear oam ethernet
link-fault-management
state
Copyright © 2012, Juniper Networks, Inc.
Chapter 4: Ethernet Interface Operational Mode Commands
user@host> clear oam ethernet link-fault-management state ge-0/3/3
Cleared link-fault-management state for interface ge-0/3/3
151