Junos OS Interfaces Command Reference - Juniper Networks

Table 101: ATM show interfaces Output Fields (continued)
Field Name
Packet Forwarding
Engine
configuration
CoS information
Field Description
Copyright © 2012, Juniper Networks, Inc.
Information about the configuration of the Packet Forwarding Engine:
• Destination slot—FPC slot number.
Information about the CoS queue for the physical interface.
• CoS transmit queue—Queue number and its associated user-configured
forwarding class name.
• Bandwidth %—Percentage of bandwidth allocated to the queue.
• Bandwidth bps—Bandwidth allocated to the queue (in bps).
• Buffer %—Percentage of buffer space allocated to the queue.
• Buffer usec—Amount of buffer space allocated to the queue, in microseconds.
This value is nonzero only if the buffer size is configured in terms of time.
• Priority—Queue priority: low or high.
• Limit—Displayed if rate limiting is configured for the queue. Possible values
are none and exact. If exact is configured, the queue transmits only up to the
configured bandwidth, even if excess bandwidth is available. If none is
configured, the queue transmits beyond the configured bandwidth if
bandwidth is available.
Chapter 12: ATM Interface Operational Mode Commands
Level of Output
extensive
extensive
583