Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
show interfaces (Aggregated SONET/SDH)
Syntax show interfaces asnumber
Release Information Command introduced before Junos OS Release 7.4.
Description (M Series and T Series routers only) Display status information about the specified
Required Privilege
aggregated SONET/SDH interface.
Options asnumber—Display standard information about the specified aggregated SONET/SDH
Level
interface.
brief | detail | extensive | terse—(Optional) Display brief interface information.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
view
List of Sample Output show interfaces (Aggregated SONET) on page 530
show interfaces brief (Aggregated SONET) on page 530
show interfaces detail (Aggregated SONET) on page 530
show interfaces extensive (Aggregated SONET) on page 531
Output Fields Table 95 on page 526 lists the output fields for the show interfaces (aggregated
SONET/SDH) command. Output fields are listed in the approximate order in which they
appear.
Table 95: Aggregated SONET/SDH show interfaces Output Fields
Field Name
Physical Interface
Physical interface
Enabled
Interface index
526
Field Description
Name of the physical interface.
State of the interface. Possible values are described in the “Enabled Field”
section under “Common Output Fields Description” on page 125.
Physical interface's index number, which reflects its initialization sequence.
Level of Output
All levels
All levels
detail extensive none
Copyright © 2012, Juniper Networks, Inc.