Junos OS Interfaces Command Reference - Juniper Networks

show interfaces filters
Syntax show interfaces filters
Release Information Command introduced before Junos OS Release 7.4.
Command introduced on PTX Series Packet Transport Switches for Junos OS Release
12.1.
Description Display all firewall filters that are installed on each interface in a system.
Options none—Display filter information about all interfaces.
interface-name—(Optional) Display filter information about a particular interface.
Additional Information For information about how to configure firewall filters, see the Junos OS Policy Framework
Required Privilege
Level
Configuration Guide. For related operational mode commands, see the Junos OS Routing
Protocols and Policies Command Reference.
view
List of Sample Output show interfaces filters on page 52
show interfaces filters interface-name on page 52
show interfaces filters (PTX Series Packet Transport Switches) on page 52
Output Fields Table 14 on page 51 lists the output fields for the show interfaces filters command. Output
fields are listed in the approximate order in which they appear.
Table 14: show interfaces filters Output Fields
Field Name
Interface
Admin
Link
Proto
Input Filter
Copyright © 2012, Juniper Networks, Inc.
Output Filter
Field Description
Name of the interface.
Interface state: up or down.
Link state: up or down.
Protocol configured on the interface.
Chapter 2: Common Interface Commands
Names of any firewall filters to be evaluated when packets are
received on the interface, including any filters attached through
activation of dynamic service.
Names of any firewall filters to be evaluated when packets are
transmitted on the interface, including any filters attached through
activation of dynamic service.
51