14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Table 146: show interfaces (Link Services IQ) Output Fields (continued)<br />

Field Name<br />

Multilink Frame<br />

Relay UNI NNI<br />

bundle options<br />

Field Description<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.<br />

Multilink Frame Relay UNI NNI only) Configured information about Multilink<br />

Frame Relay bundle options.<br />

• Device type—DCE (data communication equipment) or DTE (data terminal<br />

equipment).<br />

• MRRU—Configured size of the maximum received reconstructed unit (MRRU):<br />

1500 to 4500 bytes. The default is 1524 bytes.<br />

• Bandwidth—Speed at which the interface is running.<br />

• Fragmentation threshold—Configured fragmentation threshold: 128 through<br />

16,320 bytes, in integer multiples of 64 bytes. The default setting is 0, which<br />

disables fragmentation.<br />

• Red differential delay limit—Red differential delay limit among bundle links<br />

has been reached, indicating an action will occur.<br />

• Yellow differential delay limit—Yellow differential delay among bundle links<br />

has been reached, indicating a warning will occur.<br />

• Red differential delay action—Type of actions taken when the red differential<br />

delay exceeds the red limit: Disable link transmit or Remove link from service.<br />

• Link layer overhead—Percentage of bundle bandwidth to be set aside for link<br />

layer overhead.<br />

• Reassembly drop timer—Drop timeout value to provide a recovery mechanism<br />

if individual links in the link services bundle drop one or more packets: 1 through<br />

127 milliseconds. By default, the drop timeout parameter is 0 (disabled). A<br />

value under 5 ms is not recommended.<br />

• Links needed to sustain bundle—Minimum number of links to sustain the<br />

bundle: 1 through 8.<br />

• LIP Hello timer—Link Interleaving Protocol hello timer: 1 through 180 seconds.<br />

• Acknowledgement timer—Maximum period to wait for an add link<br />

acknowledgement, hello acknowledgement, or remove link<br />

acknowledgement: 1 through 10 seconds.<br />

Chapter 22: Link Services Interface Operational Mode <strong>Command</strong>s<br />

• Acknowledgement retries—Number of retransmission attempts to be made<br />

for consecutive hello or remove link messages after the expiration of the<br />

acknowledgement timer: 1 through 5.<br />

Level of Output<br />

detail extensive none<br />

835

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!