Junos OS Interfaces Command Reference - Juniper Networks

clear oam ethernet connectivity-fault-management policer
Syntax clear oam ethernet connectivity-fault-management policer maintenance-domain md-name
maintenance-association ma-name
Release Information Command introduced in Junos OS Release 10.0.
Description On M7i and M10i with the Enhanced CFEB (CFEB-E), M320, M120, MX Series, T320, and
Required Privilege
T640 routers, clear connectivity-fault-management policer statistics.
Options The following options are supported:
Level
Related
Documentation
maintenance-domain md-name—Name of an existing CFM maintenance domain. If this
option is not specified, policer statistics are cleared for all maintenance associations
for all maintenance domains.
maintenance-association ma-name —Name of an existing CFM maintenance association.
view
•
If this option is not specified, policer statistics are cleared for all maintenance
associations for given maintenance domain. This option cannot be specified without
specifying maintenance-domain name.
show oam ethernet connectivity-fault-management policer on page 346
Output Fields When you enter this command, you are provided feedback on the status of your request.
clear oam ethernet connectivityfault-management
policer
user@host> clear oam ethernet connectivity-fault-management policer
Policer statistics cleared
clear oam ethernet connectivityfault-management
policer maintenance-domain md-name maintenance-association ma-name
Copyright © 2012, Juniper Networks, Inc.
Chapter 4: Ethernet Interface Operational Mode Commands
user@host> clear oam ethernet connectivity-fault-management policer
maintenance-domain md5 maintenance-association ma5-1
Policer statistics cleared
149