Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
Table 96: SONET/SDH show interfaces Output Fields (continued)
Field Name
HDLC configuration
CoS information
Packet Forwarding
Engine
configuration
Logical Interface
Logical interface
Index
SNMP ifIndex
Generation
Flags
Encapsulation
PPP parameters
544
Field Description
Information about the HDLC configuration.
• Policing bucket—Configured state of the receiving policer.
• Shaping bucket—Configured state of the transmitting shaper.
• Giant threshold—Giant threshold programmed into the hardware.
• Runt threshold—Runt threshold programmed into the hardware.
Information about the CoS queue for the physical interface.
• CoS transmit queue—Queue number and its associated user-configured
forwarding class name.
• Bandwidth %—Percentage of bandwidth allocated to the queue.
• Bandwidth bps—Bandwidth allocated to the queue (in bps).
• Buffer %—Percentage of buffer space allocated to the queue.
• Buffer usec—Amount of buffer space allocated to the queue, in microseconds.
This value is nonzero only if the buffer size is configured in terms of time.
• Priority—Queue priority: low or high.
• Limit—Displayed if rate limiting is configured for the queue. Possible values
are none and exact. If exact is configured, the queue transmits only up to the
configured bandwidth, even if excess bandwidth is available. If none is
configured, the queue transmits beyond the configured bandwidth if
bandwidth is available.
Information about the configuration of the Packet Forwarding Engine:
• Destination slot—FPC slot number.
• PLP byte—Packet Level Protocol byte.
Name of the logical interface.
Logical interface index number, which reflects its initialization sequence.
Logical interface SNMP interface index number.
Unique number for use by Juniper Networks technical support only.
Information about the logical interface. Possible values are described in the
“Logical Interface Flags” section under “Common Output Fields Description”
on page 125.
Encapsulation on the logical interface.
The PPP loopback clear timer value.
Level of Output
extensive
extensive
extensive
All levels
detail extensive none
detail extensive none
detail extensive
All levels
All levels
extensive
Copyright © 2012, Juniper Networks, Inc.