14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Output Fields For more information, see the output fields table for the particular interface type in which<br />

Sample Output<br />

show interfaces<br />

extensive<br />

(Circuit Emulation)<br />

Sample Output<br />

show interfaces<br />

extensive<br />

(Fast Ethernet)<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.<br />

you are interested. For information about destination class and source class statistics,<br />

see the “Destination Class Field” section and the “Source Class Field” section under<br />

“Common Output Fields Description” on page 125. For sample output for specific interfaces,<br />

see the other topics in this collection.<br />

If a Circuit Emulation (CE) PIC is configured for SAToP pseudowire, then pseudowire<br />

statistics are displayed in the CE information section of the show interface extensive<br />

output. If SAToP pseudowire is not configured on the CE PIC, then all the CE information<br />

counters will be displayed as 0 (zero).<br />

user@host> show interface t1-0/0/0 extensive<br />

Physical interface :t1-0/0/0, Enabled, Physical Link : Up<br />

Interface index:61441<br />

Speed : 1.54 Mbps, Loopback: Disabled<br />

Operational state : Enabled, Encapsulation : Trans<br />

Encoding : b8zs, Framing : unframe, Build-out : 0-30<br />

Inversion : enable, Clock source : master<br />

Description :<br />

Traffic statistics:<br />

T1 media: Seconds<br />

ES 1643<br />

SES 1643<br />

CE Info Packets Bytes<br />

CE Rx : 2395529 306627712<br />

CE Tx : 2396259 306721152<br />

CE Rx Drop: 0 0<br />

CE Tx Drop: 0 0<br />

CE Overrun Events: 0<br />

CE Underrun Events: 0<br />

Chapter 4: Ethernet Interface Operational Mode <strong>Command</strong>s<br />

user@host> show interfaces fe-0/2/1 extensive<br />

Physical interface: fe-0/2/0, Enabled, Physical link is Up<br />

Interface index: 129, SNMP ifIndex: 23, Generation: 130<br />

Link-level type: Ethernet, MTU: 1514, Speed: 100mbps, Loopback: Disabled,<br />

Source filtering: Disabled, Flow control: Enabled<br />

Device flags : Present Running<br />

Interface flags: SNMP-Traps Internal: 0x4000<br />

CoS queues : 4 supported, 4 maximum usable queues<br />

Hold-times : Up 0 ms, Down 0 ms<br />

Current address: 00:90:69:91:c4:3e, Hardware address: 00:90:69:91:c4:3e<br />

Last flapped : 2006-04-16 23:00:41 PDT (02:08:05 ago)<br />

Statistics last cleared: 2006-04-16 21:42:00 PDT (03:26:46 ago)<br />

Traffic statistics:<br />

Input bytes : 17539 152 bps<br />

Output bytes : 92968 224 bps<br />

Input packets: 348 0 pps<br />

Output packets: 1349 0 pps<br />

Input errors:<br />

Errors: 0, Drops: 0, Framing errors: 0, Runts: 0, Policed discards: 0,<br />

L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0,<br />

FIFO errors: 0, Resource errors: 0<br />

239

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!