Junos OS Interfaces Command Reference - Juniper Networks

Services Interfaces
Link states) are not displayed. The system-generated logical interface at-0/0/0.32767
is not reported at all.
• The following example shows how you can move from the context of the logical system
ls1 back to the context of the main router:
user@host:ls1> clear cli logical-system
Cleared default logical system
user@host>
For more logical system configuration examples, including verification of proper operation
and verification performed by logical system administrators, see the Junos Feature Guide.
Services interfaces provide specific capabilities for manipulating traffic before it is
delivered to its destination.
NOTE: On M Series and T Series routers, services interfaces are installed on
PICs. On J Series routers, services interfaces are software-based.
Services interfaces are described in the following sections:
• M Series and T Series Services Interfaces on page 19
• J Series Services Interfaces on page 21
M Series and T Series Services Interfaces
Table 8 on page 19 lists the services interfaces that are supported on M Series and T
Series routers.
Table 8: M Series and T Series Services Interfaces
Interface
Copyright © 2012, Juniper Networks, Inc.
Adaptive services
Generic routing
encapsulation (GRE)
IP-over-IP encapsulation
tunnel
Syntax
sp-fpc/pic/port
gr-fpc/pic/port
ip-fpc/pic/port
PIC
Adaptive Services MultiServices
Adaptive Services
Link Services
MultiServices
Tunnel Services
Adaptive Services
Link Services
MultiServices
Tunnel Services
Chapter 1: Interface Types
19