Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
show interfaces irb
Syntax show interfaces irb
Release Information Command introduced in Junos OS Release 8.4.
Description Display integrated routing and bridging interfaces information.
Options brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the interface with the specified
SNMP index.
statistics—(Optional) Display static interface statistics.
Additional Information Integrated routing and bridging (IRB) provides simultaneous support for Layer 2 bridging
Required Privilege
Level
and Layer 3 IP routing on the same interface. IRB enables you to route local packets to
another routed interface or to another bridging domain that has a Layer 3 protocol
configured.
view
List of Sample Output show interfaces irb extensive on page 282
show interfaces irb snmp-index on page 283
Output Fields Table 40 on page 278 lists the output fields for the show interfaces irb command. Output
Table 40: show interfaces irb Output Fields
Field Name
Physical Interface
Physical interface
Enabled
Proto
Interface index
278
fields are listed in the approximate order in which they appear.
Field Description
Name of the physical interface.
State of the physical interface. Possible values are described in the “Enabled
Field” section under “Common Output Fields Description” on page 125.
Protocol configured on the interface.
Physical interface index number, which reflects its initialization sequence.
Level of Output
All levels
All levels
terse
detail extensive none
Copyright © 2012, Juniper Networks, Inc.