14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Table 128: Channelized STM1 show interfaces Output Fields (continued)<br />

Field Name<br />

Destination<br />

Local<br />

Broadcast<br />

DLCI<br />

DLCI statistics<br />

Sample Output<br />

show interfaces<br />

extensive (Channelized<br />

STM1, SDH)<br />

Field Description<br />

IP address of the remote side of the connection.<br />

IP address of the logical interface.<br />

Broadcast address.<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.<br />

(Frame Relay) DLCI number of the logical interface. The following DLCI<br />

information is displayed: Flags, Total down time, Last down, and Traffic statistics.<br />

Flags is one or more of the following:<br />

• Active—Set when the link is active and the DTE and DCE are exchanging<br />

information.<br />

• Down—Set when the link is active, but no information is received from the<br />

DCE.<br />

• Unconfigured—Set when the corresponding DLCI in the DCE is not configured.<br />

• Configured—Set when the corresponding DLCI in the DCE is configured.<br />

• Dce-configured—Displayed when the command is issued from the DTE.<br />

(Frame Relay) Data-link connection identifier (DLCI) statistics.<br />

• Active DLCI—Number of active DLCIs.<br />

• Inactive DLCI—Number of inactive DLCIs.<br />

Chapter 17: Channelized STM1 Interface Operational Mode <strong>Command</strong>s<br />

Level of Output<br />

detail extensive none<br />

detail extensive none<br />

detail extensive none<br />

detail extensive none<br />

detail extensive none<br />

user@host> show interfaces e1-1/0/0:1 extensive<br />

Physical interface: e1-1/0/0:1, Enabled, Physical link is Up<br />

Interface index: 148, SNMP ifIndex: 285, Generation: 2915<br />

Link-level type: Frame-relay, MTU: 1504, SDH mode, Speed: E1, Loopback: None,<br />

FCS: 16, Framing: G704<br />

Device flags : Present Running<br />

Interface flags: Point-To-Point SNMP-Traps<br />

Link flags : Keepalives DTE<br />

ANSI LMI settings: n391dte 6, n392dte 3, n393dte 4, t391dte 10 seconds<br />

LMI: Input: 51700 (00:00:02 ago), Output: 51701 (00:00:02 ago)<br />

DTE statistics:<br />

Enquiries sent : 43186<br />

Full enquiries sent : 8515<br />

Enquiry responses received : 43185<br />

Full enquiry responses received : 8515<br />

DCE statistics:<br />

Enquiries received : 0<br />

Full enquiries received : 0<br />

Enquiry responses sent : 0<br />

Full enquiry responses sent : 0<br />

Common statistics:<br />

Unknown messages received : 0<br />

Asynchronous updates received : 0<br />

Out-of-sequence packets received : 0<br />

Keepalive responses timedout : 0<br />

Nonmatching DCE-end DLCIs:<br />

2<br />

739

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!