14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 48: show oam ethernet connectivity-fault-management interfaces Output<br />

Fields (continued)<br />

Field Name<br />

FRR Flag<br />

MEP identifier<br />

Neighbours<br />

Direction<br />

MAC address<br />

MEP status<br />

Remote MEP not<br />

receiving CCM<br />

Erroneous CCM<br />

received<br />

Cross-connect CCM<br />

received<br />

RDI sent by some<br />

MEP<br />

CCMs sent<br />

CCMs received out<br />

of sequence<br />

LBMs sent<br />

Valid in-order LBRs<br />

received<br />

Valid out-of-order<br />

LBRs received<br />

LBRs received with<br />

corrupted data<br />

LBRs sent<br />

LTMs sent<br />

Field Description<br />

LSR/LER forwarding the CCM Frame into a bypass tunnel is set.<br />

Its value can be yes or no.<br />

Maintenance association end point (MEP) identifier.<br />

Number of MEP neighbors.<br />

MEP direction configured.<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.<br />

MAC address configured for the MEP.<br />

Indicates the status of the connectivity fault management (CFM) protocol<br />

running on the MEP: Running, inactive, disabled, or unsupported.<br />

Whether the remote MEP is not receiving connectivity check messages (CCMs).<br />

Whether erroneous CCMs have been received.<br />

Whether cross-connect CCMs have been received.<br />

Whether the remote defect indication (RDI) bit is set in messages that have<br />

been received. The absence of the RDI bit in a CCM indicates that the<br />

transmitting MEP is receiving CCMs from all configured MEPs.<br />

Number of CCMs transmitted.<br />

Number of CCMs received out of sequence.<br />

Number of loopback request messages (LBMs) sent.<br />

Number of loopback response messages (LBRs) received that were valid<br />

messages and in sequence.<br />

Number of LBRs received that were valid messages and not in sequence.<br />

Number of LBRs received that were corrupted.<br />

Number of LBRs transmitted.<br />

Linktrace messages (LTMs) transmitted.<br />

Chapter 4: Ethernet Interface Operational Mode <strong>Command</strong>s<br />

Level of Output<br />

detail extensive<br />

All levels<br />

All levels<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

detail extensive<br />

309

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!