Junos OS Interfaces Command Reference - Juniper Networks

show interfaces mc-ae
Syntax show interfaces mc-ae id identifier unit number
Release Information Command introduced in Junos OS Release 9.6.
Description On MX Series routers with multi-chassis aggregated Ethernet (mc-aeX) interfaces, use
Required Privilege
this command to display information about the mc-aeX interfaces.
Options identifier—(Optional) Name of the multichassis aggregated Ethernet interface.
Level
number—(Optional) Specify the logical interface by unit number.
view
List of Sample Output show interfaces mc-ae on page 298
show interfaces mc-ae (Active/Active Bridging and VRRP over IRB on MX Series
Routers) on page 298
Output Fields Table 45 on page 297 lists the output fields for the show interfaces mc-ae command.
Output fields are listed in the approximate order in which they appear.
Table 45: show interfaces mc-ae Output Fields
Output Field Name
Member Links
Local Status
Peer Status
Peer State
Copyright © 2012, Juniper Networks, Inc.
Logical Interface
Core Facing Interface
Chapter 4: Ethernet Interface Operational Mode Commands
Field Description
Identifiers of the configured multichassis link aggregate
interfaces configured interfaces.
Status of the local link: active or standby.
Status of the peer link: active or standby.
Status of the local and peer links in an active/active bridge or
VRRP over integrated routing and bridging (IRB) configuration
on MX Series routers, including:
Logical Interface—Aggregated Ethernet (AE) aggregate number
and unit number.
Topology Type—The bridge or VRRP topology type configured
on the AE.
Local State—Up or down state of the local device.
Peer State—Up or down state of the peer device.
Peer Ip/ICL-PL/State—Address, interface and state of the peer
device.
Identifier and unit of the mc-ae interface.
Label: pseudowire interface or Ethernet interface.
297