Junos OS Interfaces Command Reference - Juniper Networks

show dialer pools
Syntax show dialer pools
Release Information Command introduced before Junos OS Release 7.4.
Description (J Series routers only) Display dialer pool information. The dialer pool provides a group
Required Privilege
of dialing options for ISDN interfaces.
Options none—(Same as detail) Display detailed information about all ISDN dialer pools.
Level
brief | detail—(Optional) Display the specified level of output.
pool-name—(Optional) Display information about the specified dialer pool only.
view
List of Sample Output show dialer pools on page 640
show dialer pools brief on page 640
show dialer pools detail on page 640
Output Fields Table 110 on page 639 lists the output fields for the show dialer pools command. Output
Table 110: show dialer pools Output Fields
Field Name
Pool
Dialer Interfaces
Name
State
Subordinate Interfaces
Name
Flags
Priority
fields are listed in the approximate order in which they appear.
Field Description
Name of the dialer pool.
Name of configured dialer interfaces.
Status of the dialer interface: Active or Inactive
Name of each physical ISDN interface configured as part of the dialer interface.
Status of the physical B-channel interface.
Priority of the interface.
Copyright © 2012, Juniper Networks, Inc.
Chapter 14: ISDN Interface Operational Mode Commands
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels
639