Junos OS Interfaces Command Reference - Juniper Networks

show interfaces (M Series and T Series Router Management and Internal Ethernet)
Syntax (T640 and
T1600 Routers with
RE-C1800 and TX
Matrix Plus Routers)
Syntax (PTX Series
Packet Transport
Syntax show interfaces fxp(0 | 1)
Switches)
show interfaces em0
show interfaces em0
Release Information Command introduced before Junos OS Release 7.4.
Command introduced on PTX Series Packet Transport Switches for Junos OS Release
12.1.
Description (M Series, T Series, and PTX Series devices only) Display status information about the
Required Privilege
management Ethernet and internal Ethernet interfaces.
Options fxp(0 | 1)—(M Series and T Series routers except routers with RE-C1800 or RE-C2600)
Level
Display standard information about the management Ethernet or internal Ethernet
interface, respectively.
em0—(T640 and T1600 routers with RE-C1800, TX Matrix Plus routers, and PTX Series
Packet Transport Switches) Display standard information about the management
Ethernet interface.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
view
List of Sample Output show interfaces brief (Management Ethernet) on page 947
Copyright © 2012, Juniper Networks, Inc.
Chapter 27: Management Ethernet and Internal Ethernet Interface Operational Mode Commands
show interfaces (Management Ethernet) on page 947
943