Junos OS Interfaces Command Reference - Juniper Networks

show interfaces (far-end-interval)
Syntax show interfaces far-end-interval interface-fpc/pic/port
Release Information Command introduced in Junos OS Release 9.4.
Description On channelized interfaces, display the far end interval data for the specified interface.
Required Privilege
Level
view
List of Sample Output show interfaces far-end-interval coc12-5/2/0 on page 173
show interfaces far-end-interval coc1-5/2/1:1 on page 173
Output Fields Table 27 on page 173 lists the output fields for the show interfaces far-end-interval
Sample Output
show interfaces
far-end-interval
coc12-5/2/0
show interfaces
far-end-interval
coc1-5/2/1:1
command. Output fields are listed in the approximate order in which they appear.
Table 27: show interfaces far-end-interval Output Fields
Field Name
Physical interface
SNMP ifIndex
ES-L/P
SES-L/P
UAS-L/P
Copyright © 2012, Juniper Networks, Inc.
Field Description
Interface FPC/PIC/port values.
SNMP interface index value.
Error detection—Errored seconds.
Error detection—Severely errored seconds.
Error detection—Unavailable seconds.
user@host> show interfaces far-end-interval coc12-5/2/0
Physical interface: coc12-5/2/0, SNMP ifIndex: 121
05:30-current:
ES-L: 1, SES-L: 1, UAS-L: 0
05:15-05:30:
ES-L: 0, SES-L: 0, UAS-L: 0
05:00-05:15:
ES-L: 0, SES-L: 0, UAS-L: 0
04:45-05:00:
ES-L: 0, SES-L: 0, UAS-L: 0
04:30-04:45:
ES-L: 0, SES-L: 0, UAS-L: 0
04:15-04:30:
ES-L: 0, SES-L: 0, UAS-L: 0
04:00-04:15:
...
Chapter 4: Ethernet Interface Operational Mode Commands
user@host> run show interfaces far-end-interval coc1-5/2/1:1
Physical interface: coc1-5/2/1:1, SNMP ifIndex: 342
05:30-current:
ES-L: 1, SES-L: 1, UAS-L: 0, ES-P: 0, SES-P: 0, UAS-P: 0
173