Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
show interfaces (T1 or E1)
Syntax show interfaces interface-type
Release Information Command introduced before Junos OS Release 7.4.
Description Display status information about the specified T1 or E1 interface.
Required Privilege
Options interface-type—On M Series and T Series routers, the T1 interface type is t1-fpc/pic/port,
Level
whereas the E1 interface type is e1-fpc/pic/port. On the J Series routers, the T1 interface
type is t1-pim/0/port, whereas the E1 interface type is e1-pim/0/port.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
view
List of Sample Output show interfaces (T1, IMA Link) on page 404
show interfaces (T1, PPP) on page 405
show interfaces detail (T1, PPP) on page 405
show interfaces extensive (T1 CRC Errors) on page 406
show interfaces extensive (T1, PPP) on page 406
show interfaces (E1, Frame Relay) on page 408
show interfaces detail (E1, Frame Relay) on page 409
show interfaces extensive (E1, Frame Relay) on page 410
show interfaces (E1, IMA Link) on page 412
Output Fields Table 73 on page 394 lists the output fields for the show interfaces (T1 or E1) command.
Output fields are listed in the approximate order in which they appear.
Table 73: T1 or E1 show interfaces Output Fields
Field Name
Physical Interface
Physical interface
394
Field Description
Name of the physical interface.
Level of Output
All levels
Copyright © 2012, Juniper Networks, Inc.