14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 128: Channelized STM1 show interfaces Output Fields (continued)<br />

Field Name<br />

Link-level type<br />

MTU<br />

Clocking<br />

Speed<br />

Loopback<br />

FCS<br />

Framing<br />

Parent<br />

Device flags<br />

Interface flags<br />

Link flags<br />

Hold-times<br />

Keepalive settings<br />

Field Description<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.<br />

Encapsulation being used on the physical interface.<br />

MTU size on the physical interface.<br />

<strong>Reference</strong> clock source. It can be Internal or External.<br />

Speed at which the interface is running.<br />

Whether loopback is enabled and the type of loopback (local or remote).<br />

Frame check sequence on the interface (either 16 or 32). The default is 16 bits.<br />

Physical layer framing format used on the link. It can be G704, G704-NO-CRC4,<br />

or Unframed. The default is G704.<br />

(Channelized STM1 IQ interfaces only) Name and interface index of the interface<br />

to which a particular child interface belongs. None indicates that this interface<br />

is the top level.<br />

Information about the physical device. Possible values are described in the<br />

“Device Flags” section under “Common Output Fields Description” on page 125.<br />

Information about the interface. Possible values are described in the “Interface<br />

Flags” section under “Common Output Fields Description” on page 125.<br />

Information about the link. Possible values are described in the “Link Flags”<br />

section under “Common Output Fields Description” on page 125.<br />

Current interface hold-time up and hold-time down, in milliseconds.<br />

(PPP and HDLC) Configured settings for keepalives.<br />

Chapter 17: Channelized STM1 Interface Operational Mode <strong>Command</strong>s<br />

• intervalseconds—The time in seconds between successive keepalive requests.<br />

The range is 10 seconds through 32,767 seconds, with a default of 10 seconds.<br />

• down-count number—The number of keepalive packets a destination must<br />

fail to receive before the network takes a link down. The range is1 through<br />

255, with a default of 3.<br />

• up-count number—The number of keepalive packets a destination must receive<br />

to change a link’s status from down to up. The range is 1 through 255, with a<br />

default of 1.<br />

Level of Output<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

All levels<br />

detail extensive<br />

detail extensive none<br />

729

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!