Junos OS Interfaces Command Reference - Juniper Networks

show protection-group ethernet-ring aps
Syntax show protection-group ethernet-ring aps
Release Information Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 12.1 for EX Series switches.
Description Display the status of the Automatic Protection Switching (APS) and Ring APS (RAPS)
Required Privilege
messages on an Ethernet ring.
Options This command has no options.
Level
Related
Documentation
view
•
show protection-group ethernet-ring data-channel on page 367
• show protection-group ethernet-ring interface on page 369
• show protection-group ethernet-ring node-state on page 371
• show protection-group ethernet-ring statistics on page 374
• show protection-group ethernet-ring vlan on page 377
List of Sample Output show protection-group ethernet-ring aps (EX Switches) on page 366
show protection-group ethernet-ring aps (Owner Node, Normal Operation on MX
Routers) on page 366
show protection-group ethernet-ring aps (Ring Node, Normal Operation on MX
Routers) on page 366
show protection-group ethernet-ring aps (Owner Node, Failure Condition on MX
Routers) on page 366
show protection-group ethernet-ring aps (Ring Node, Failure Condition on MX
Routers) on page 366
Output Fields Table 63 on page 365 lists the output fields for the show protection-group ethernet-ring
aps command. Output fields are listed in the approximate order in which they appear.
Table 63: show protection-group ethernet-ring aps Output Fields
Field Name
Ethernet Ring Name
Request/State
No Flush
Copyright © 2012, Juniper Networks, Inc.
Ring Protection Link Blocked
Chapter 4: Ethernet Interface Operational Mode Commands
Field Description
Name configured for the Ethernet ring.
Status of the Ethernet ring RAPS messages.
• NR—Indicates there is no request for APS on the ring.
• SF—Indicates there is a signal failure on the ring.
State of the ring flushing: No (normal) or Yes (failure).
Blocking on the ring protection link: Yes or No.
365