Junos OS Interfaces Command Reference - Juniper Networks

show interfaces interface-set (Ethernet Interface Set)
Syntax show interfaces interface-set interface-set-name
Release Information Command introduced in Junos OS Release 8.5.
Description (MX Series routers only) Display information about the specified Gigabit Ethernet or
Required Privilege
10-Gigabit Ethernet interface set on MX Series routers with enhanced queuing DPCs or
enhanced queuing MPCs.
Options interface-set interface-set-name—Display information about the specified Gigabit Ethernet
Level
or 10-Gigabit Ethernet interface set.
detail | terse—(Optional) Display the specified level of output.
view
List of Sample Output show interfaces interface-set terse on page 252
show interfaces interface-set detail on page 252
Output Fields Table 33 on page 251 describes the information for the show interfaces interface-set
command.
Table 33: Ethernet show interfaces interface-set Output Fields
Field Name
Physical Interface
Interface set
Interface set index
Traffic statistics
Egress queues
supported
Egress queues in
use
Queue counters
Members
Field Description
Copyright © 2012, Juniper Networks, Inc.
Name of the interface set or sets.
Index number of the interface set.
Number and rate of bytes and packets received and transmitted on the specified
interface set.
• Input bytes, Output bytes—Number of bytes and number of bytes per second
received and transmitted on the interface set
• Input packets, Output packets—Number of packets and number of packets
per second received and transmitted on the interface set.
Total number of egress queues supported on the specified interface set.
Total number of egress queues used on the specified interface set.
Queued packets, Transmitted packets, and Dropped packets statistics for the
four forwarding classes.
List of all the interface sets.
Chapter 4: Ethernet Interface Operational Mode Commands
Level of Output
All levels
detail
detail
detail
detail
detail
detail
251