14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Junos</strong> <strong>OS</strong> 12.1 <strong>Interfaces</strong> <strong>Command</strong> <strong>Reference</strong><br />

Table 92: show interfaces (Serial) Output Fields (continued)<br />

Field Name<br />

Addresses, Flags<br />

Destination<br />

Local<br />

Broadcast<br />

Generation<br />

Sample Output<br />

512<br />

show interfaces<br />

(Serial, EIA-530)<br />

show interfaces brief<br />

(Serial, EIA-530)<br />

Field Description<br />

Information about the address flags. Possible values are described in the<br />

“Addresses Flags” section under “Common Output Fields Description” on<br />

page 125.<br />

IP address of the remote side of the connection.<br />

IP address of the logical interface.<br />

Broadcast address of the logical interface.<br />

Unique number for use by <strong>Juniper</strong> <strong>Networks</strong> technical support only.<br />

Level of Output<br />

detail extensive none<br />

detail extensive none<br />

detail extensive none<br />

detail extensive none<br />

detail extensive<br />

user@host> show interfaces se-5/0/1<br />

Physical interface: se-5/0/1, Enabled, Physical link is Up<br />

Interface index: 144, SNMP ifIndex: 41<br />

Type: Serial, Link-level type: PPP, MTU: 1504, Maximum speed: 16384kbps<br />

Device flags : Present Running<br />

Interface flags: Point-To-Point Internal: 0x4000<br />

Link flags : Keepalives<br />

Keepalive settings: Interval 10 seconds, Up-count 1, Down-count 3<br />

Keepalive: Input: 32 (00:00:10 ago), Output: 31 (00:00:07 ago)<br />

LCP state: Opened<br />

NCP state: inet: Opened, inet6: Not-configured, iso: Not-configured, mpls:<br />

Not-configured<br />

CHAP state: Closed<br />

CoS queues : 8 supported, 8 maximum usable queues<br />

Last flapped : 2006-04-26 15:10:18 PDT (00:05:22 ago)<br />

Input rate : 0 bps (0 pps)<br />

Output rate : 0 bps (0 pps)<br />

Logical interface se-5/0/1.0 (Index 71) (SNMP ifIndex 45)<br />

Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: PPP<br />

Protocol inet, MTU: 1500<br />

Flags: None<br />

Addresses, Flags: Is-Preferred Is-Primary<br />

Destination: 12.0.0.0/30, Local: 12.0.0.1, Broadcast: 12.0.0.3<br />

user@host> show interfaces se-5/0/1 brief<br />

Physical interface: se-5/0/1, Enabled, Physical link is Up<br />

Type: Serial, Link-level type: PPP, MTU: 1504<br />

Device flags : Present Running<br />

Interface flags: Point-To-Point Internal: 0x4000<br />

Link flags : Keepalives<br />

Keepalive settings: Interval 10 seconds, Up-count 1, Down-count 3<br />

Keepalive: Input: 235 (00:00:10 ago), Output: 234 (00:00:00 ago)<br />

Logical interface se-5/0/1.0<br />

Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: PPP<br />

inet 12.0.0.1/30<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!