Junos OS Interfaces Command Reference - Juniper Networks

show ppp address-pool
Syntax show ppp address-pool pool-name
Release Information Command introduced in Junos OS Release 7.5.
Description Display PPP address pool information.
Required Privilege
Options pool-name—Address pool name.
Level
detail—(Optional) Display detailed address pool information.
view
List of Sample Output show ppp address-pool on page 448
show ppp address-pool detail on page 448
Output Fields Table 78 on page 447 lists the output fields for the show ppp address-pool command.
Output fields are listed in the approximate order in which they appear.
Table 78: show ppp address-pool Output Fields
Field Name
Address pool
Address range
Number of assigned
addresses
Number of
addresses
configured
Assigned addresses
Field Description
Trace address pool code.
Copyright © 2012, Juniper Networks, Inc.
Range of sequentially ordered IP addresses contained in the address pool.
Fixed IP address that is to be given to remote users when they dial in. This is a
host-only IP address (subnet mask is 255.255.255.255) and is only for single
connection receiver profiles.
Number of IP addresses that are available for allocation and used by PPP
sessions.
Addresses assigned to PPP sessions from the address pool.
Chapter 8: PPP Interface Operational Mode Commands
Level of Output
All levels
detail
All levels
All levels
detail
447